MS6812 Tone Generator & Cable / Wire Tracer
If You search then MS6812 Tone Generator & Cable / Wire Tracer is best choice, Buy it now for Price is 41.39
FEATURES: The MS6812 cable tracker is designed to identify and trace wires or cables within a group without damaging the insulation
For telephone line it can identify some state in the line and more convenience to install debug maintain telephone line
There is a transmitter (MS6812-T) and a receiver (MS6812-R) included in the cable tracker
Functions: Judge continuity of the cables or wires Track the cables or wires and diagnose the break point Receiver the tone signal on the cables or wires (telephone line) Identify the state in the working telephone line (clear ring busy) Send a single solid tone or a dual alternating tone to the object cables or wires SPECIFICATIONS: Send tone frequency: 1.5kHz Receive frequency range: 100 300kHz Power supply: 6F22 (9V) Receiver size: 9 1/2 x 1 3/4 x 1 inch Transmitter size: 5 3/4 x 1 1/2 x 1 inch Receiver weight: 4 Oz (including battery) Transmitter weight: 4 Oz (including battery) What is in the box: Transmitter Receiver 9V battery x 2 Pouch
Related Product MS6812 Tone Generator & Cable / Wire Tracer
BRELONG E27 120x3014SMD 12W 1080LM 6000-6500K White Light Horizontal Plug Lamp (AC85-265V)
BRELONG E27 120x3014SMD 12W 1080LM 6000-6500K White Light Horizontal Plug Lamp (AC85-265V)
Price : 22.69
Cree xm - L T6 bike lights Headlights ultra bright 4800 lm headlamp
Intelligent control circuits three shift dimming circuit:1: highlighting 4.0 A output current brightness 4800 lm
2: bright 2.0 A output current the brightness is as high as 2400 lm
3: flash 4.0 A output current brightness 4800 lm.
Price : 70.39
APM 2.8 V2.8 ArduPilot UAV Flight Controller wi Ublox Neo-6M GPS z 3DR
Introduction: This is the new APM 2.6 autopilot module
The sensors are exactly the same as with APM2.5+ however this version does not have an onboard compass which makes this version ideal for use with multicopters and rovers
The APM 2.6 is a complete open source autopilot system and the bestselling technology that won the prestigious 2012 Outback Challenge UAV competition
It allows the user to turn any fixed rotary wing or multirotor vehicle (even cars and boats) into a fully autonomous vehicle
capable of performing programmed GPS missions with waypoints
Available with top or side connectors
This revision of the board has no onboard compass which is designed for vehicles (especially multicopters and rovers) where the compass should be placed as far from power and motor sources as possible to avoid magnetic interference
(On fixed wing aircraft its often easier to mount APM far enough away from the motors and ESCs to avoid magnetic interference so this is not as critical but APM 2.6 gives more flexibility in that positioning and is a good choice for them too)
This is designed to be used with the 3DR uBlox GPS with Compass (see option below) so that the GPS/Compass unit can be mounted further from noise sources than APM itself
Features: - Arduino Compatible! - Can be ordered with top entry pins for attaching connectors vertically or as side entry pins to slide your connectors in to either end horizontally - Includes 3-axis gyro accelerometer and magnetometer along with a high-performance barometer - Onboard 4 MegaByte Dataflash chip for automatic datalogging - Optional off-board GPS uBlox LEA-6M module with Compass
- One of the first open source autopilot systems to use Invensenses 6 DoF Accelerometer/Gyro MPU-6000
- Barometric pressure sensor upgraded to MS5611-01BA03 from Measurement Specialties
- Atmels ATMEGA2560 and ATMEGA32U-2 chips for processing and usb functions respectively
GPS Features: - Built-in compass GPS module - Main chip: Ublox LEA-6H - With fast satellite searching speed and high precision - Compatible with APM serial port and I2C port - Includes round plastic shell and GPS support 3DR Radio Telemetry Kit 433Mhz Descriptions: - The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set offering a lower price longer range and superior performance to Xbee radios
It's availabl in 433Mhz
and in the following configurations: serial board (for the air) and USB (for the ground)
- The radio is a 2-way half-duplex wireless communication system with a standard TTL UART interface based on HopeRFs HM-TRP data link modules and custom firmware that improves upon the modules original features and performance
- The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface and radio firmware with configurable parameters
Firmware upgrades and configuration are fully supported in the APM Mission Planner
Configuration is also pos
Price : 258.89
5M 40W 300 x 5050 SMD WaterProof Flexible Bright LED RGB Strip Lights +24-key remote control+ 5A EU Power Adaptor (100-240V)
5M 40W 300 x 5050 SMD WaterProof Flexible Bright LED RGB Strip Lights +24-key remote control+ 5A EU Power Adaptor (100-240V)
Price : 53.19
